Scylla

The Scylla is a light but strong top carbon raceframe. The main feature of the Scylla is it's high stiffness. By using 60T Torayca carbon, lug monocoque construction and effectively shaped tubes, we were able to produce a very stiff frame that weighs in at less than 1 kg.

The Scylla has been improved with internal cable guides, suitable for both mechanical and electronic cables. For improved strength, we added a conical 1 1/8 - 1 1/2 3D shaped head tube. The new BB30 bottom bracket is 19% stronger than the old version.

Each frame is made entirely of carbon fiber. The monocoque construction allows us to design the tubes in shapes that are optimized for aerodynamic performance, stiffness and comfort. This means that compared to a traditional carbon frame, the Scylla cuts through the air like a knife. The special shaped tubing of the Scylla guarantees the perfect combination of lateral stiffness and vertical compliancy. We designed and engineered the tubing to reduce twisting and flexing, which can rob the frame of energy and efficiency. We also to reinforced the carbon in specific stress point of the frame to add strenght where it is needed most.

The behavior of a bicycle frame is totally asymmetric. For the purpose of the construction of the frame, we assume that the rider applies equal force with his left and right leg. However, the pull on the chain is always applied on the right side of the frame. To counter this force, this frame has an asymmetrical internal construction. Even though it is not visible on the outside, the left and right sides of this frame are not constructed the same way. To counter the effect of chain pull, strategic areas are reinforced with extra layers of carbon. Reinforcing different areas on the left and right side of the frame helps us keep the weight of the frame down and significantly decreases the risk of fractures.

Frames are sold including
- Fork ProRace RAZOR full carbon (400 gr) + expander
- Canecreek aheadset
- Front gear clamp
- ProRace carbon seatpost
- Seatclamp
- Carbon Prorace bottlecage

Bikes are available with Campagnolo, Shimano or Sram groupsets.

The Scylla is available in sizes S to XXL.

Frame properties:
Geometry: sloping (2 cm)
Weight: 1.000 g
Torsional Stiffness:
- Head tube: 173 N/mm
- Bottom Bracket: 229 N/mm
- Seat Stay/Chain Stay: 59 N/mm

Design
The Scylla is only available in "CHYPS" design.

The "CHYPS" design offers hundreds of thousands color combinations.
Please check the "CHYPS"-tab to make your own design.

A c-c = Seat Tube (measured center-center)
A c-t = Seat Tube (measured center-top)
B = Top Tube (measured center-center)
BV = Virtual horizontal length of the top tube in a classic geometry
C = Set Back
D = Bracket - Rear Axle
E = Head Tube
X° = Seat Tube Angle
Y° = Head Tube Angle

Remarks:
(1) The level and quality of the bike equipment is linked to the selected groupset, not to the frame

(2) Components can be upgraded at an additional charge, e.g.
- Wheels can be upgraded to Campa Vento, Scirocco, Zonda, Neutron, Eurus
- Handlebars can be upgraded to carbon or carbon-alu models
- Saddles can be upgraded

(3) Cross bike is equipped with Truvativ cranks, Continental Mountainking tyres and additional frogleg brakes handles

(5) Flight Carbon bikes are equipped Prorace Crono carbon timetrial handlebar.
Flight bikes with Super Record or Dura Ace group sets are equipped with carbon wheels and Veloflex tires.
Flight bikes with other groupsets follow the regular equipment list.

(6) All bikes are shipped without pedals.

(7) All prices are recommended end-user prices in euro. Prorace reserves the right to change price, equipment and technical specifications of the bikes at all times, without prior notice.