Nemesis

K917 1:Carbon 2: Alpine White 3: Carbon 4: Carbon 5: Mosaic Red 

The Nemesis is a new frame in our range. This light frame weighs inj at less than 900 g and offers many advantages: strong, high quality 30T Torayca carbon and a stunning look.

The behavior of a bicycle frame is totally asymmetric. For the purpose of the construction of the frame, we assume that the rider applies equal force with his left and right leg. However, the pull on the chain is always applied on the right side of the frame. To counter this force, this frame has an asymmetrical internal construction. Even though it is not visible on the outside, the left and right sides of this frame are not constructed the same way. To counter the effect of chain pull, strategic areas are reinforced with extra layers of carbon. Reinforcing different areas on the left and right side of the frame helps us keep the weight of the frame down and significantly decreases the risk of fractures.

Nemesis frames are sold including
- ProRace Leda carbon fork (400 g) + expander
- Headset
- Front gear clamp
- ProRace Red Star seatpost and seatclamp
- Carbon Prorace bottlecage
For frame prices and equipment, see frame overview

Bikes are available with Campagnolo or Shimano groupsets.
For bike prices and equipment, see bike overview

The Nemesis is available in sizes S to 3XL.

Frame properties:
Geometry: sloping
Weight: 900 g
Torsional Stiffness:
- Head tube: 111.0 N/mm
- Bottom Bracket: 234.9 N/mm
- Seat Stay/Chain Stay: 50.6 N/mm

Design
The Nemesis is available in CHYPS designs in hundreds of thousands color combinations.
Click here for a simulation.


K906 1: Alpine White 2: Cyan 3: Carbon  K902 1:Mint 2:Carbon 3:Florida Orange  

Geometry


Size  A
C-C 
A
C-T 
BV  X°  Y° 
420  450  498  516  n/a  406  116  74.0  72.5 
447  480  517  535  n/a  406  138  73.5  72.5 
470  510  530  550  n/a  406  165  72.5  73.0 
XL  480  540  544  565  n/a  406  195  72.0  73.0 
2XL   500  570  567  585  n/a  408  215  71.5  73.0 
3XL  529  600  588  599  n/a  408  230  71.5  73.0 

A c-c = Seat Tube (measured center-center)
A c-t = Seat Tube (measured center-top)
B = Top Tube (measured center-center)
BV = Virtual horizontal length of the top tube in a classic geometry
C = Set Back
D = Bracket - Rear Axle
E = Head Tube
X° = Seat Tube Angle
Y° = Head Tube Angle


(C) 2004 - All rights reserved

Print this page